Single-board pattern · Make it your own
29 × 29 · 1 board · 4 colors
Free Evergreen Christmas Tree Perler Bead Pattern & Grid
By BeadColor Studio Original pattern · v1
A small evergreen Christmas tree with three tiers, warm ornaments and a short brown trunk.
- Board
- 29 × 29
- Bead size
- 5 mm
- Boards
- 1
- Colors
- 5
- Beads
- 254
- Difficulty
- Beginner
Creator note
Build each tier from top to bottom. Check the ornaments remain inside the green outline and the trunk is centered.
Downloads and remixes welcome with attribution. Preview artwork is illustrative; the Grid tab is the editable pattern.
Pattern materials
MARD 221 screen-reference codes · compare with physical beads before buying.
| Color | Reference | Beads |
|---|---|---|
| MARD B09 | B09 | 114 |
| MARD B04 | B04 | 109 |
| MARD G14 | G14 | 25 |
| MARD F03 | F03 | 5 |
| MARD A04 | A04 | 1 |
Print and make this fuse bead pattern
Download the free printable PDF above, or open a copy in the bead maker to change the colors and grid. The PDF is a reading reference with a MARD 221 screen-color legend; check your physical bead colors and pegboard before making.
Use a pegboard that matches your bead size. For an overlay, check the PDF calibration line at 100% print scale before placing beads. See the Perler bead pattern printing guide for the full setup.
Want to start from a photo? Try the Perler bead pattern maker, or browse more free fuse bead patterns.
More patterns to explore
Single-board pattern · Make it your own
29 × 29 · 1 board · 3 colors
Single-board pattern · Make it your own
29 × 29 · 1 board · 5 colorsWhat do you need to make Evergreen Christmas Tree?
Evergreen Christmas Tree is a 29 × 29 fuse bead pattern using 254 beads in 5 colors. Open the editable grid, review the materials and print a pattern. Check the palette against your physical beads and use a compatible pegboard. For a printed overlay, verify the 50 mm calibration line and grid alignment before placing beads.
Print this pattern at the right scale · Read the finishing guide