Single-board pattern · Make it your own
29 × 29 · 1 board · 4 colors
Free Green Dragon Perler Bead Pattern & Grid
By BeadColor Studio Original pattern · v1
A small green dragon with a wing, tail, horns and a bright belly. The silhouette is designed as an original bead grid.
- Board
- 29 × 29
- Bead size
- 5 mm
- Boards
- 1
- Colors
- 5
- Beads
- 245
- Difficulty
- Beginner
Creator note
Build the tail and wing before the belly. Inspect the wing root and tail connection after placing beads.
Downloads and remixes welcome with attribution. Preview artwork is illustrative; the Grid tab is the editable pattern.
Pattern materials
MARD 221 screen-reference codes · compare with physical beads before buying.
| Color | Reference | Beads |
|---|---|---|
| MARD B04 | B04 | 132 |
| MARD B09 | B09 | 69 |
| MARD G15 | G15 | 35 |
| MARD G05 | G05 | 8 |
| MARD H06 | H06 | 1 |
Print and make this fuse bead pattern
Download the free printable PDF above, or open a copy in the bead maker to change the colors and grid. The PDF is a reading reference with a MARD 221 screen-color legend; check your physical bead colors and pegboard before making.
Use a pegboard that matches your bead size. For an overlay, check the PDF calibration line at 100% print scale before placing beads. See the Perler bead pattern printing guide for the full setup.
Want to start from a photo? Try the Perler bead pattern maker, or browse more free fuse bead patterns.
More patterns to explore
Single-board pattern · Make it your own
29 × 29 · 1 board · 4 colors
Single-board pattern · Make it your own
29 × 29 · 1 board · 5 colorsWhat do you need to make Green Dragon?
Green Dragon is a 29 × 29 fuse bead pattern using 245 beads in 5 colors. Open the editable grid, review the materials and print a pattern. Check the palette against your physical beads and use a compatible pegboard. For a printed overlay, verify the 50 mm calibration line and grid alignment before placing beads.
Print this pattern at the right scale · Read the finishing guide