Single-board pattern · Make it your own
29 × 29 · 1 board · 4 colors
Free Little Alien Perler Bead Pattern & Grid
By BeadColor Studio Original pattern · v1
An original green alien with a broad head, dark oval eyes and a small body, made for a single pegboard.
- Board
- 29 × 29
- Bead size
- 5 mm
- Boards
- 1
- Colors
- 3
- Beads
- 304
- Difficulty
- Beginner
Creator note
Set the eyes first, then fill around them. Keep the narrow neck and body connected.
Downloads and remixes welcome with attribution. Preview artwork is illustrative; the Grid tab is the editable pattern.
Pattern materials
MARD 221 screen-reference codes · compare with physical beads before buying.
| Color | Reference | Beads |
|---|---|---|
| MARD B04 | B04 | 194 |
| MARD H06 | H06 | 70 |
| MARD B09 | B09 | 40 |
Print and make this fuse bead pattern
Download the free printable PDF above, or open a copy in the bead maker to change the colors and grid. The PDF is a reading reference with a MARD 221 screen-color legend; check your physical bead colors and pegboard before making.
Use a pegboard that matches your bead size. For an overlay, check the PDF calibration line at 100% print scale before placing beads. See the Perler bead pattern printing guide for the full setup.
Want to start from a photo? Try the Perler bead pattern maker, or browse more free fuse bead patterns.
More patterns to explore
Single-board pattern · Make it your own
29 × 29 · 1 board · 5 colors
Single-board pattern · Make it your own
29 × 29 · 1 board · 6 colorsWhat do you need to make Little Alien?
Little Alien is a 29 × 29 fuse bead pattern using 304 beads in 3 colors. Open the editable grid, review the materials and print a pattern. Check the palette against your physical beads and use a compatible pegboard. For a printed overlay, verify the 50 mm calibration line and grid alignment before placing beads.
Print this pattern at the right scale · Read the finishing guide