How to Print Perler Bead Patterns at Actual Size
Print Perler bead patterns as readable PDFs with grid lines, symbols and bead counts. Check actual-size scaling, A4 or Letter paper and multi-board page order.
How do you print a fuse bead pattern at actual size?
In BeadColor Export, choose PDF and Actual size 1:1, then select A4 or US Letter. Print the PDF at 100% with Fit and Shrink disabled. Measure the calibration line: it must be 50 mm. Check the grid centers against your own pegboard before placing beads. Fit to page produces a reading reference rather than a physical overlay. For larger patterns, follow the board position labels to arrange the printed pages.
- F03 × 89
- H06 × 61
- B09 × 39
- F08 × 15
- H12 × 5
Choose a readable grid
In Export, choose PDF, then Actual size 1:1 or Fit to page. Select A4 or US Letter and preview each board and its materials. Color + numbers preserves bead colors; Black & white symbols uses matching letter/number symbols in the grid and materials list.
Check the printed scale
For an overlay, choose Actual size 1:1 and print the PDF at 100% with Fit and Shrink turned off. Match the printer paper to the selected PDF size. Measure the calibration line: it must be 50 mm. Check grid centers against your own pegboard before placing beads; the templates use nominal spacing and manufacturers can differ. Fit to page is a reading reference, not an overlay.
Organize larger patterns
Use the board position labels in multi-board PDFs to keep pages in order. Lay out your boards before placing beads and track progress in Craft mode.
Make a pattern from your own image
Open Bead MakerExplore the Perler bead pattern maker, choose an editable fuse bead pattern, or try the Strawberry charm pattern shown in this guide.