BeadColor Studio · Original
58 × 58 · 4 boards · 8 colorsGeometric Fuse Bead Wall Art Pattern: Tidal Sun
By BeadColor Studio Original pattern · v1
Create an original 87 × 87 geometric bead picture with a terracotta sun, concentric wave bands and a dark architectural frame. Plan a nine-board layout and customize the earthy colors in the editor.
- Board
- 87 × 87
- Bead size
- 5 mm
- Boards
- 9
- Colors
- 6
- Beads
- 7569
- Difficulty
- Advanced · multi-board
Creator note
Set up nine compatible 29 × 29 boards in a three-by-three square. Complete the outer frame, then follow the curved bands across board seams. Keep the narrow contrasting bands intact. This large piece needs a planned transfer and cooling surface; follow your bead manufacturer’s finishing instructions.
Downloads and remixes welcome with attribution. Preview artwork is illustrative; the Grid tab is the editable pattern.
Pattern materials
Digital palette · compare with physical beads before buying.
| Color | Reference | Beads |
|---|---|---|
| Warm paper | ART02 | 2694 |
| Ink | ART01 | 1630 |
| Ochre | ART03 | 1487 |
| Sage | ART05 | 648 |
| Deep teal | ART07 | 622 |
| Terracotta | ART04 | 488 |
Print and make this fuse bead pattern
Open “Edit this pattern” to customize the grid, then use Export for a PNG or printable PDF with a materials list. Standard free exports support a 29 × 29 grid and up to 16 colors, subject to the daily allowance; larger formats and professional layouts require Pro.
Use a pegboard that matches your bead size. For an overlay, check the PDF calibration line at 100% print scale before placing beads. See the Perler bead pattern printing guide for the full setup.
Want to start from a photo? Try the Perler bead pattern maker, or browse more free fuse bead patterns.
More patterns to explore
What do you need to make Tidal sun?
Tidal sun is a 87 × 87 fuse bead pattern using 7569 beads in 6 colors. Open the editable grid, review the materials and print a pattern. Check the palette against your physical beads and use a compatible pegboard. For a printed overlay, verify the 50 mm calibration line and grid alignment before placing beads.
Print this pattern at the right scale · Read the finishing guide